GEC Globe Pendant assembly instructions.

Disassembled vintage GEC glass antique light.

Parts List
Iron frame
Top glass bowl
Bottom glass bowl
Lower ‘V’ shaped bracket
Bottom finial
Ceiling rose
Top cap (with hook and bulb holder)
2x Thumb screws
Suspension chain

A black metal clock frame with decorative top and bottom, lying on a dirty white surface with a toggle switch inside. To the right, there is a beige speaker or electronic device.

Step 1.
Start by having the iron frame in the orientation that matches the image and place the ‘V shaped bracket into the ring.

A person holding a vintage outdoor lantern with a glass top and wrought iron frame against a white floor.

Step 2.
Place the top bowl (with the larger aperture opening) into the frame.

Vintage metal and glass hanging pendant light fixture with ornate curved chain and hook

Step 3.
Place the top cap onto the glass bowl. (without a bulb - this comes later).

Close-up of an antique outdoor lantern with a rusted metal top and decorative metal arms, held by a person wearing a glove.

Step 4.
Swing the other arm up and lock them both into position using the two thumb screws.

Disassembled antique lamp with reflective interior, placed on a white surface.

Step 5.
At this stage you can now add your desired bulb (Bayonet B22) to the bulb holder.

A person's hand holding a large round industrial light fixture with a textured glass cover and a metal frame, positioned over a white floor.

Step 6.
Lay the lamp on its side (or use an extra pair of hands) and offer the lower glass bowl up to the frame.

A hand holding a vintage glass ceiling light fixture with a black metal base and two rusted mounting brackets.

Step 7.
Screw the finial into the frame to complete.

Note: Take care not to overtighten. It only needs to be nipped up to retain the glass.